Valid to UK only - excludes oversized items
The S scale denotes a ratio of 1:64. This scale signifies that one unit of measurement on the model corresponds to 64...
Most airbrushes will come with a pressure regulator built-in, but what is this facility for, and which pressure...
A number of modellers will work with white metal components as either part of their model or as additional...
There are a few options for motorising a level crossing on a model railway layout: Servo motor: One option is to use...
If like most modellers, you have an abundance of used model paints lying around, you will be familiar with the pang...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
We are often advised to dry-brush models to achieve particular effects, but what is dry brushing, and when would you use this technique?Dry brushing is the process of putting just enough paint on your brush to leave a trace of it on your...
A composite coach is a railway carriage with accommodation for more than one class of passengers.In the early days of pre-nationalisation, this typically meant that a single carriage would have had first and third class accommodation. In later...
With so many functions on a modern or advanced multimeter, and so many reasons why you may want to use one, it would be impossible to answer the question 'How do I use a multimeter?' comprehensively. However, most modellers will only want to check...
When modellers talk about quartering, they are referring to the side-rods on their locomotives being set to the correct position in relation to each other.Contrary to belief, the side-rods on either side of a locomotive do not rotate level...
A wash is a thinned down coat of paint used by modellers to add details such as weathering, dust, grime, oil, rust or mud to the models and scenery on their layouts or dioramas.A wash is a coat of paint so thin, that when applied to a model,...
Interlocking is used in railway signalling to ensure that potentially dangerous combinations of points and/or signals cannot be selected.Interlocking works by either a physical mechanism or an electronic application preventing a signaller from...
When new to the world of model railways, it's likely you will read many articles explaining the best way to go about those crucial first steps, and you may well be advised to make a general-purpose locomotive one of your first rolling stock...
Dreaming up track plans for a layout is somewhat an art in itself. A common mistake is to sketch a layout on a scrap piece of paper that realistically, has no chance of fitting into the space available (we're all guilty of that at one time or...
Many model kits, whether they be of buildings, coaches, aeroplanes or any other type of vehicle, will likely have glazing to attach at some point during the build. Your choice of glue when installing the glazing is an important one because many...
S.N.E.R. stands for the Scottish North Eastern Railway, it was the result of a merger between the Aberdeen Railway and the Scottish Midland Junction Railway in 1856.The Aberdeen railway (opened 1847-1850) ran between Aberdeen, Forfar and Arbroath...
A pinion gear (often called a pinion cog) is a small metal cog that can be found fitted to the shaft of a model's motor.Not all model railway locomotives have a pinion cog with many featuring a long worm screw instead, but whichever is used, their...
The Great Western Railway Coat of Arms was a logo that appeared on GWR rolling stock from 1927 to 1933 and then reappeared in 1942 until nationalisation in 1947.The coat of arms replaced the previously used Garter Crest and features two shields...