'Katie' A Model of the 0-4-0 Side Tank Locomotive
Gn15 Locomotive Body Kit 'Hattie'
Saddle tank partner to 'Columbine'Dimensions: L 104 x W 45 x H 80The kit requires a Hornby 'Smokey Joe' chassis to complete
A simple kit of fifteen casting makes this pretty locomotive. It is designed to fit easily onto the Hornby 'Smokey Joe' chassis with the minimum of modification. A little estate railway locomotive - the kit is complete with all the 'bits' required to finish it. Dimensions: L 104 x W 45 x H 80 The kit requires a Hornby 'Smokey Joe' chassis to complete.
The kit comes complete with Dapol wheelsets and rear lamp castings. The base is loaded with lead shot for increased stability. L.128mm W. 57mm [over roof] H. 180mm
Tender Locomotive Kit designed to fit on the 'Smokey Joe' Mechanism.Specifications and dimensions are similar to that of 'Nellie' above, except for the addition of a tender. A proud Septimus Spokeshave is in attendance. Length 218mm, Width 46mm, Height 190mm.
The 'Oysterbeach Special' Coach Kit is complete with Dapol wheelsets, deep button upholstered seating and oil lamp. It includes extra chassis weight for increased stability for its' height.Dimensions: L95 x W68 x H210mmKit complete with 00 wheelsets
Open Knife Edge Coach with Canopy.Comes with a Dapol 40mm wheelbase chassis.
'Pierrot' makes a model in 1/2 inch to 1 foot scale (1:24) of a small version of the Hunslet 'Alice' class locomotives suitable for running with other Gn15 models. The kit is designed to fit onto the 'standard' outside cylinder Hornby chassis known generally as 'Smokey Joe'. 110mm long x 48mm wide x 78mm high from rail level
The kit makes a model of a vertical boiler narrow gauge locomotive in the style of the late cartoonist Rowland Emett and is designed to run on 00/H0 track. The kit is complete except for glue and paint and the parts are vacuum cast in polyurethane resin to a very high standard. The model requires a Hornby basic 'Smokey Joe' 0-4-0 chassis to...
The kit is complete except for paint, transfers and glue. The main body parts are cast in Polyurethane resin and the kit is designed to fit either the Hornby 'Bill' or 'Ben' chassis with no modification or the 'Smokey Joe' chassis with minor modification.L 145, W 46, H 185 mm
Compact 7mm Narrow Gauge Skip Body mounted on a lead loaded Sand Hutton chassis for added weight. Suitable for scales up to Gn15. The body actually tips. 57mm long x 38mm wide x 45mm high.