No products
21 Pin Decoder Blanking Plate (x10)
E-Z Command 6 Pin DCC Decoder 90 deg (DC Compatible)
21 Pin DCC Loco-Decoder (with Brake Button function)
Next18 Decoder Next18DCC decoders and sockets benefit from a compact, user friendly interface with improved functionality. The size advantages of this interface enables smaller locomotives to be equipped with DCC and the benefits of this development will be incorporated into new Bachmann Branchline models over the coming years. Features: 0.7A continuous...
Next18 DCC Loco-Decoder (with Brake Button function)Suitable for models equipped with DC motors (including coreless motors) 0.7A continuous load Variable pulse width frequency motor regulation (up to 40kHz) Motor output overload protection; Back EMF (de-selectable) 15mm x 9.5mm x 2.8mm
Next18 DCC Loco-Decoder (with Brake Button function) Dynamis
6 Pin DCC Loco−Decoder with Back EMF featuring Railcom0.8 Amp continuous Current 1.5 Amp Peak Motor Current 4 Function Outputs - Amplified (0.5 Amps Each / Total) plus 2 Logic, susi or Servo outputs Long Addressing Multiple Programming Options Consist Option (Double Heading) Railcom Compatible DC Operation User Defined Speed Curve Size – 14mm / 9mm /...
6 Pin DCC Loco-Decoder with Back EMF featuring Railcom
Plux22 DCC Loco-Decoder (with Brake Button function)
Power Clip Connector with Cable
Dapol DCC Signal Controller Developed in collaboration with Train-Tech.com.
Shunting Starter Pack This is the Shunting Starter Pack from Hornby's Basset Lowke range. It is a selection of track, points and a controller, packaged to complement their steam punk range but it also makes an attractive starter set for traditional modellers on the path to a small 00 gauge shunting diorama.
OMNI Series 4FN Next18
Dimensions:Body only: 28mm x 38mm x 52mm deep Top overall inc Fulcrum and tabs: 40mm x 45mm Depth inc soldering-free connectors: 68mmPower:Switchable 6~12v or 12~18v DC. Avg power 20mAConnection:9 way spring terminals. Wire diameter up to 32x.2 or 18g. Ideal .16x.2 or 20g. Minimum 7x.2 or 24gControl: Change turnout by reversing polarity of DC...
Sapphire No-Clean Flux 30ml
2 Aspect (Red/Green) Signal
Multi Scale Track Tester
Pack of 2 OO Buffer Stop Lights
Hornby Type Colour Light Signal
Dapol Imperium2 - 18 Pin Next 18 6 Function Decoder
Dapol Imperium4 - 6 Pin 2 Function Decoder 14.5 x 8.4 x 2.8mm
Dapol Imperium5 - Micro 6 Pin 2 Function Decoder 10 x 8.4 x 2.8mm
UK Transformer 15V 1A- For use in conjunction with the HM6000 App Based Analogue DC Control System Standard Wall Plug Mains Transformer. - 220-240V 50-60Hz - UK only.
Peco Lectrics, Twistlock Turnout Motor DimensionsLength = 42mm Hook to Hook = 42mm Depth = 25mm Extension Pin = 72mm
Pecolectrics PSU 12vDC 2 amp output, 2-pin term block
Passing contact switch
On-On Lever Switch
3 on-off switch
Single distant signal
The HM6000 allows an operator to control and operate analogue trains from a mobile phone or tablet via an app. Requires separate adaptor. Suitable for OO, N, OO9 & ON30 Gauges.
HM7000-21TXS - BLE decoder (21 Pin - TXS Sound)
HM7000-8TXS BLE Decoder (8 Pin ±TXS Sound)
HM7000-N18TXS Bluetooth® & DCC Sound Decoder (Next18-pin)
Point Motor Powerful solenoid point motor for new model Hornby points that have the sliding bar mechanism.
Link wire set containing two standard Hornby power clips and one set of wires.
Elite controller DCC The Hornby Elite Digital Controller is the unit for those who wish to take their train control to a new and advanced level.
Pack of 20 DCC electro point clips
Hornby DCC Reverse Loop Module To be used when track configurations such as a reverse loop or triangle permanent way sections are used in a circuit.
Digital power connecting clip For connecting the R8216 Point and Accessory Decoder to the track.
Surface mounted point motor
RJ12 Select/Elite to Walkabout Select Lead (3 m)
SkaleLighting Plugs x 6
Modern Image Tail Lamp (Flashing) Great little addition that adds realism to the back of your wagons or coaches. Detects motion and turns on automatically. Automatically turns off 4mins after last movement. No pick-up, wires or soldering required - LED plugs in. Can be fitted to brake vans, coaches, wagons etc. Runs for AGES on a standard button...
Flame Effect Tail Light (Flickering) Great little addition that adds realism to the back of your wagons or coaches. Detects motion and turns on automatically. Automatically turns off 4mins after last movement. No pick-up, wires or soldering required - LED plugs in. Can be fitted to brake vans, coaches, wagons etc. Runs for AGES on a standard button...