Valid to UK only - excludes oversized items
A DPDT (Double Pole Double Throw) switch allows two completely separate circuits to be controlled by just one switch....
Although both a vertical cutter and a standard one do the same job, they do have different purposes. The vertical...
Every toolbox has a can of WD-40 in it to rid the world of squeaks and loosen any stubborn nuts and bolts, so the...
Rotor-sag, sometimes also referred to as rotor droop produces a notable curve in the rotor blades of a parked...
How long it should take to construct a model kit may seem like a question that can't be answered as it of course...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
There are several options for motorising the waterwheel on a mill or the sails of a windmill on a model railway layout. Here are a few: Small electric motor: A small electric motor can be used to power the waterwheel or sails of a windmill. This...
Simulating seasonal variations is a common theme for many modellers who wish to model specific times of the year, such as a sunny summer's day on the beach or a winter scene such as a Christmas sleigh ride. Modelling a rainy day is perhaps not the...
There are a few options you can consider when it comes to modelling working streetlamps: LED streetlamps: LED streetlamps are a popular choice for model railways as they are energy-efficient and produce minimal heat and are a good low-cost...
There are several options for simulating running water on a model railway layout. Here are a few options to consider:Static water: One option is to use static water as a starting point. Static Water is often modelled using a resin or silicone...
Periodically, modellers may face the issue of having dissimilar track codes present on the same layout. This can occur when both code 75 and code 100 track segments are in use. This is a significant problem as these two codes have different size...
Yes, it is highly recommended that modellers should use a surge protector on their DCC layouts. This is because all model railway layouts can be sensitive to power fluctuations and surges. These can cause damage to locomotives, electrical...
Point-to-point and Continuous-run are terms used to describe two different options for layout designs. Layout configuration is one of the first decisions that a modeller will make with regard to a new layout. Inevitably this decision may be...
Judging scale speed can be a challenging task for model train enthusiasts, as the perception of speed can be influenced by a variety of factors. Here are some tips that will allow a modeller to judge scale speed more accurately:Establish a...
Yes, it is possible to operate points at a distance without having to electrify them. Modellers may choose to adopt a non-electrical approach for a number of reasons including cost or perhaps due to a lack of experience with electrical work. One...
When it comes to DCC layouts, it is generally recommended to use Electrofrog points for better performance and reliability. Electrofrog points have metal rails that are live all the time and the polarity of the rails is switched to match the...
Using a moistened sander, also known as a wet sanding technique, has several advantages over using a dry sander for modellers working on kits or scene elements for a layout or diorama. Wet sanding produces less dust than dry sanding, which is...
Electrically conductive paint can be used in a variety of ways on a model railway layout. One common application is to create electrical connections between different sections of track or between track and other electrical components. As such, it...