Valid to UK only - excludes oversized items
A DPDT (Double Pole Double Throw) switch allows two completely separate circuits to be controlled by just one switch....
Although both a vertical cutter and a standard one do the same job, they do have different purposes. The vertical...
Every toolbox has a can of WD-40 in it to rid the world of squeaks and loosen any stubborn nuts and bolts, so the...
Rotor-sag, sometimes also referred to as rotor droop produces a notable curve in the rotor blades of a parked...
How long it should take to construct a model kit may seem like a question that can't be answered as it of course...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
The purpose of a flow retarder when airbrushing is to slow down the drying time of the paint in the airbrush, allowing for a more controlled and consistent coverage. Flow retarder is a liquid medium that is added to the paint before airbrushing....
A reverse loop layout is a type of model railway track arrangement in which the train travels around a loop and returns in the opposite direction. This creates a continuous loop of track that can be used for a variety of purposes. In a reverse...
There are a number of options available to modellers wishing to create a dry stone wall on their layouts. Firstly, many manufacturers produce detailed and realistic-looking dry stone wall segments for use in layouts. These can be quickly added to...
An autofrog is a type of track switch that is designed to simplify wiring and eliminate the need for additional electrical components such as frog juicers or wiring isolators. The term autofrog is often used specifically to refer to the...
An electromagnetic de-coupler is a device used in model railways to separate train carriages without physically touching them. It works by creating a temporary magnetic field that pushes one carriage away from another, allowing them to be...
When painting natural metal surfaces on a model, it is generally recommended to use a grey or white primer. Grey or white primers provide a neutral base for the metallic paint, allowing the metallic pigments to stand out without being affected by...
Digital Command Control (DCC) has several advantages over analogue control systems in the context of model railways. Firstly, with DCC, multiple locomotives can be controlled independently on the same track. Each locomotive has its own unique...
To best model a fence to run over uneven ground on a model railway, a modeller will need to consider the terrain and the fence design. There is a wide selection of readily available fencing options for modellers to choose from. Although highly...
Yes, fibre optics can be used as a single lighting solution for buildings and streetlamps on a model railway layout. Fibre optics are thin, flexible cables that transmit light from a source to the desired location. They can be used to create a...
When painting a model it is always possible that paint can seep underneath masking tape and thus ruin the painting effect. That said, with careful preparation, this should be relatively easy to avoid. The following tips offer some guidance as to...
To avoid performance issues, it is generally recommended that modellers run their locomotives on a regular basis. The frequency with which locomotives should be run may vary depending on a number of factors, such as the type of locomotive, the age...
A motorised track cleaner can provide several advantages when it comes to maintaining a model railway layout, including: Efficiency: A motorised track cleaner can clean the track much faster than manual methods, allowing a modeller to clean the...