Valid to UK only - excludes oversized items
Tracksetta is a term that refers to a tool used for the shaping of flexible track sections, it is sometimes also...
Waterslide transfers are a key component of scale modelling, allowing you to add intricate markings, insignias and...
Using a compressor with an airbrush offers several advantages that can greatly enhance scale modelling or model...
T-Gauge is the smallest commercially available model railway gauge in the world, with a track width of just 3 mm....
Razor saws are frequently used by modellers for cutting a number of different materials including light woods such as...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
There are a number of options available to Modellers when it comes to modelling deciduous trees in winter for a layout. Here are some suggestions: Bare Branches: During the winter season, deciduous trees lose their leaves, leaving behind bare...
Various types of steam locomotives were used for shunting operations. Here are some of the commonly seen steam engines used for shunting: Saddle Tank Engines: Saddle tank engines, also known as saddle tanks, were frequently employed for shunting...
Yes, it is possible to use a battery to power a small, portable model railway layout. In fact, using a battery can be a convenient and flexible way to power a layout, especially if there is a need for frequent relocation or if mains power supply...
Preventing the yellowing of decals is a common concern among scale modellers. Yellowing occurs when the decals, which are typically made of a thin film with printed designs, are exposed to certain environmental factors over time. However, there...
Twin-bolster wagons were not rigidly joined together. Here's why: Twin-bolster wagons are designed to carry long or heavy loads such as steel girders, pipes, or other large items. They feature two bolster frames, each with its own set of wheels...
A "Trestle Wagon" refers to a type of flat wagon equipped with trestles or supports. These wagons were used for the transportation of long, heavy or awkwardly shaped loads that required additional support during transit. Trestle wagons typically...
Yes, it is possible to apply washes and other weathering techniques over decals and stencils without damaging them, as long as they have been properly applied and allowed to dry thoroughly. To apply weathering techniques over decals and stencils,...
It is generally recommended to protect painted surfaces with a varnish before applying masking tape. This extra step helps to prevent the tape from lifting or damaging the paint when it is removed.Applying a varnish layer over the painted surface...
It is not necessarily unrealistic to mix diesel and steam locomotives on the same layout. In fact, it was not uncommon for railways in the transition era (late 1950s to early 1960s) to have a mix of steam and diesel locomotives operating on the...
Yes, it is possible to use insulated fishplates to isolate a section of track. Insulated fishplates, also known as insulated rail joiners, are designed to electrically separate two adjoining sections of track. Insulated fishplates are typically...
Yellowing of waterslide decal sheets is periodically a problem for modellers, especially those who enjoy collecting vintage kits. Simply put, the carrier film backing of decals ages over time and can produce a noticeable yellowing of the decals....
Lacquer paints offer several advantages over enamels or acrylics: Quick drying: Lacquer paints generally dry and cure much faster compared to enamels or acrylics. This allows for quicker application of multiple coats and reduces the overall...