Valid to UK only - excludes oversized items
Model figures are used by many creators of wonderful things, whether it be railway layouts, display dioramas, school...
Yes, an N Gauge controller is compatible with OO gauge trains. You may have to change the power clip to the track...
If you are using an aerosol spray paint you should always use one. Always read the manufacturer’s...
It can be annoying and a little baffling when model trains slow down, seemingly without reason, at a particular spot...
You do not have to use the track mat supplied with a starter set, ultimately, it's your layout and how you play with...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
There are times when you may want to operate more than one set of points using just one switch, examples of locations where this could be an advantage include, crossovers, catch points and when a dedicated route is required, this is not a problem...
We have all been there, with that wagon or coach that derails all of the time, and we suspect that the reason for this mischievous item of rolling stock constantly making a break for freedom is a lack of weight. The solution is easy though: simply...
Modern image is a phrase that railway modellers use to describe a layout that reflects modern times. Interestingly, modern image doesn't feature as a category in a lot of manufacturer's era systems which describe specific and significant periods...
The EM1s (Class 76 under the TOPS system) were a British design of Bo-Bo electric locomotive with a maximum speed of 65mph and built to a design by Sir Nigel Gresley. EM1 stands for Electric Mixed-traffic 1 and the prototype was designed as early...
Trees are a big feature on most model railway layouts. There are some great ready to go trees from various manufacturers, depicting many different types and sizes of trees that work across all gauges. But did you know that you can also easily make...
When choosing a decoder for your model, it can be expected that making your model move is something that all decoders will do as a minimum. In addition to this, all but the most basic of decoders will offer a certain amount of additional...
The white discs that were displayed on the front of steam trains and early types of diesel were a way of communicating to the signal box what type of train it was and sometimes the route that it should take.The white disc system is also known as...
RailCom is a system developed by Lenz that allows two-way communication between a DCC controller and a decoder. The early RailCom system was limited to use with Marklin's MFX standard and has been largely replaced by RailComPlus which is more...
One way to fix track to a baseboard is by tacking it down with special pins or nails. If you look closely at the sleepers on most set track and some flexible track, you will notice that every so often there is a tiny hole in the middle of the...
Safety warning Soldering irons get very hot and can reach temperatures in excess of 400 degrees centigrade, so always take great care when using a soldering iron. Give consideration to the workspace where you will be soldering as hot soldering...
Twenty years ago it would have been easy to write an instruction leaflet on how to service an engine because model locomotives were all built pretty much the same way, with a motor, a few cogs, two wires and some wheels, and removing the body...
If you have never had the pleasure or are new to wiring anything other than a controller to a layout then you are in look because installing basic 2 aspect light signals is one of the easiest things that you are ever likely to install.What...