Valid to UK only - excludes oversized items
The blanking plate is a small circuit board that manufacturers add to the DCC socket to protect the socket that your...
Photographic Backscenes have been created for modellers to create a suitable backdrop for the middle and far...
Balsa wood is a popular choice for modelling for several key reasons: Lightweight: Balsa wood is incredibly light,...
Creating gradient variations for a model railway track can add realism and interest to a layout. Here are a few ways...
How you remove ballast would depend on weather you are trying to remove excess ballast after laying and gluing your...
The most common problem and how to solve them.
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
Cyanoacrylate is best known as super glue. The best way to remove it is with acetone or an acetone-based product such as nail varnish remover, this will soften the super glue. In the eventuality of getting super glue on your skin follow...
There is no need to replace the bottle, it is more than likely a build-up of dry glue inside the nozzle. This is a common occurrence when the glue bottle is used regularly and the glue does not make it all the way back in to the applicator bottle...
You will be able to feel the blade dragging and resisting as you draw the knife over what it is you are trying to cut. With a new blade, there should not be any resistance at all. This is something that will become easier to assess with...
Ejector pins are used in the injection moulding process of the manufacturing of plastic kits and die cast kits. They apply force to eject the part from the mould: once it has been opened, the pins extend in to the mould and push the part out. They...
The main problem, which we have all been guilty of at one time or another is using too much glue. The secret is: "you don't need very much glue". When it comes to applying the glue to the model, try using a cocktail stick/tooth pick or a...
There is of course the old tried and tested method, the track rubber which does the job, no railway modeller should be without one. But there are also other products out there which take the strain for cleaning large sections of track. Dapol for...
For wargaming figures, a small coin or washer glued to the under side of the base will usually to do the job. This may also work for larger static based models. However if you are going to be weighting your rolling stock or a plane, a more...
There is a slight difference is size but both run on the same width track (16.5mm). As for the scale, OO Scale is 1/76th which is 4mm per foot, whereas HO Gauge is 1/87th that is 3.5mm per foot. For scenery, the issue is non existent as plants...
The best way to check the wheels of your locomotives is to use a tool called a back to back gauge. They are available for all scales/gauges. They are made of brass and you simply slide it over the axle and the back of the wheels. If it proves...
One easy way is to get yourself a Peco cleaning kit containing a wire brush, wheel scraper, foam cradle and oil. The foam cradle allows you to turn your loco upside down and give support while cleaning the wheels, or any other form of...
How you remove ballast would depend on weather you are trying to remove excess ballast after laying and gluing your ballast, or if you are trying to remove an existing section of track for replacement or re-landscaping.If you are just removing the...
Personally, I would never use second hand track as you don't really know what you are getting. Over time track will wear and tarnish and may even rust (for very old track) and its conductivity may become diminished even after giving it a good...