Valid to UK only - excludes oversized items
There are many products on the market for filling holes: There are plastic putties straight out of the tube, there...
From a modeller's perspective, there is no practical difference between bullhead and flat-bottom rail. The existence...
It is very tempting to use pins or nails to stick the track down but this may not be the best approach. Pins are...
Model locomotives can become weaker over time, but finding the cause is seldom a cut and dry case.There are many...
A crossover is a railway track formation that allows a train to cross from one line to another.Crossovers are...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
The simple answer is yes and no. An OO gauge layout can be made to fit on a 3-foot square table but it is entirely dependent on the radius of the curved segments of the track to be used. The radius of a curved track section is measured from...
Tracksettas are curved metal gauges that slot between the rails of flexible track to help modellers create smooth curves and bends during laying. They come in various radii so can be used to create a range of curves with varying severity, but...
Tamiya produces a wide variety of paints for different purposes and each is identified by a unique prefix. For the majority of projects, modellers will generally use 10ml bottled Tamiya paints which fall into one of three categories: LP, X or XF....
Oil spills and evidence of oil leaks are a common feature of many railway tracks around engine depots and at the end of station platforms where locomotives have been stood idling, but how is it modelled?Choosing a paint to represent oil spills...
The average size of a home layout baseboard is 4 ft wide by 6 ft long. If you are planning such a layout, you may well be wondering which radius curves will fit your board. The good news is, on a 4 ft wide board (that's 1219 mm in new money) you...
There are a variety of tools that will allow a modeller to cut track sections cleanly and accurately. Track cutters are a ready-made solution to this problem. Appearing at first glance to be a pair of ordinary 'snips' track cutters are...
Micro Set and Micro Sol are two distinct but complementary decal setting solutions produced by Microscale Industries. After all painting has been finished it is best to give the model a gloss varnish before applying decals. This has three distinct...
There are a number of ways to add weight to rolling stock so that it will better handle the track and is less likely to derail. One of the key issues is not to add too much weight. If a wagon is too heavy it may create too high a load for the...
Flow improver is a liquid compound that is designed to be used with an airbrush. Most modellers will thin their paints prior to using an airbrush, this helps with overall paint consistency giving the optimal painted surface on a model. One issue...
One of the trickiest tasks when model-making can be the positioning of very small or delicate parts. In most instances, modellers will generally use tweezers to achieve this. The problem with exceptionally small parts is they can be difficult to...
Dirty track can result in locomotives failing to run properly on a layout. If dirt or grime is present on the track then this can be transferred onto the wheels of a locomotive which will then potentially impair the electrical contact between the...
A spray booth is a very useful tool for any regular airbrush user. An airbrush will use air pressure to atomise paint into small droplets which are then sprayed onto the subject model. Not all of this spray will go on the subject model and any...