No products
Grain 0f Wheat Bulb 12v Yellow (Pack of 5)
Grain of Wheat Bulb 12v Red (Pack of 5) Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Current draw for one bulb is approx 80ma
Grain of Wheat Bulb 12v Clear (Pack of 5) Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Current draw for one bulb is approx 80ma
Grain of Wheat Bulb 12v Green (Pack of 5) Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Current draw for one bulb is approx 80ma
Grain of Wheat Bulb 12v Orange (Pack of 5) Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Current draw for one bulb is approx 80ma
Pack 20 1 Amp Diodes for PCU1 (New Style) & SS-1
PS6 6-Way Din Plug/Socket
Resistor 1K Ohm for LEDs (Pack of 10) Our range of electrical "bits and bobs" are invaluable to railway modellers, all with useful applications in the hobby.
12-Way Poly Terminal Block
LED Green 3mm (Pack of 5) 12vPack of 5 light emitting diodes. Use with GM76 resistors
LED Red 3mm (Pack of 5) 12vPack of 5 light emitting diodes. Use with GM76 resistors
LED Yellow 3mm (Pack of 5) 12vPack of 5 light emitting diodes. Use with GM76 resistors
5mm LED green pack 5Pack of 5 light emitting diodes. Use with GM76 resistors
5mm LED red pack 5Pack of 5 light emitting diodes. Use with GM76 resistors
5mm LED yellow pack 5Pack of 5 light emitting diodes. Use with GM76 resistors
Single Track Panel Controller
2.5 Amps G scale Controller
Capacitor Discharge Unit
Gaugemaster Combi Controller - Plug in TransformerThis unit is sold without a connecting lead to the track. This item can be bought separately.
Twin Track Cased Controller
Cased Transformer 12v DC
Point motor with polarity switch
Point motor No Switch
Surface Mounted Point Motor for N / HO / OO Scales Measurements:Length: 68mmWidth: 22mmDepth: 9mm
Seep Point Motor with Latching Mechanism
Point Motor Wire (Red/Green/Black) 10m Tripled (14 x 0.15)
Shuttle system for the automated end-to-end operation of trains. Suitable for gauges Z, N, TT, HO and OO
Wall Mounted Transformer - 1x 16v AC or
Multi gauge track tester for OO, HO, TT and N
Point Extension Cable
Small Reed Switch Max switching current 0.5amps (capacity 10VA)Max Voltage 220vACLength 18.5mm x 2.6mm
Power Connecting Clamp
Peco Lectrics, Twistlock Turnout Motor DimensionsLength = 42mm Hook to Hook = 42mm Depth = 25mm Extension Pin = 72mm
Extended Pin Turnout Motor (also referred to as a point motor) A versatile turnout motor for use with all OO and N gauge Peco turnouts and many other brands too. This PL-10E solenoid turnout motor can be used either with or without a mounting plate (not included).
Side Mounted Turnout Motor Clips directly into a Peco 00/H0 Setrack Turnout, either Left or Right Hand. No holes to drill, and this unit is pre wired. Can also be used with 00/H0 Streamline Turnouts.
Adaptor for use with Peco PL-10E Turnout Motors. This Adaptor Base unit enables a Peco PL-10E Turnout Motor to be surface-mounted on a baseboard. It comes with an optional extension arm and a removable over-centre spring, useful for turnouts that do not have this feature.
Accessory Switch for use with Peco PL-10E Turnout Motors. The switch connects directly to a Peco PL-10E turnout motor and can be used to control the polarity of live frogs or to automate the operation of signals and lights etc when the points are changed.
Easy to assemble unit with two microswitches to control the polarity of live frogs whilst simultaneously operating panel indicator lights. Complete with illustrated instructions. Rated 2.5 amps.
Probe for operating turnout motors (use with PL-18)
Studs and Tag Washers, for use with probe 25 studs and 25 washers in a pack
Track Isolating Switch Clipped onto Peco Streamline OO/HO track to bridge isolating gaps.
Single Pole On/Off Switch Use this to control features such as lighting circuits, or as a section switch where only 1 controller is used.
Single Pole Changeover Switch (On/On) Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals.
Pack of 6x switch joining bars. Allows Peco PL-series switches to be ganged together and operated simultaneously.
Passing contact switch with black lever. Provides the short burst of current needed to operate Peco's PL-10 and PL-11 turnout motors.