Semaphore signals were a common form of railway signalling before the advent of modern electronic signals. During the...
Cart 0 Product Products (empty)
No products
Free shipping! Shipping
£ 0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax excl.) Free shipping!
Total (tax incl.)
Search Tips
Tips categories
Latest Tips
-
How did train drivers read semaphore signals at night?Read more -
Why do some couplings have different arm heights and lengths?Read moreHow far couplings protrude from their host wagon, loco or coach is something only kit builders worried about before...
-
What is the best material to use for railings?Read moreWhen constructing a kit, lengths of wire are often included for use as railings on buildings such as signal boxes and...
-
How does Ballast Magic work?Read moreBallast Magic is a non-toxic powder-based adhesive specially formulated to allow ballast granules or coal to be...
-
Should I position signals at the entrances of any tunnels on my layout?Read moreYes, it is a good idea to position signals at the entrances of tunnels on a layout. Signals play a crucial role in...
What is the advantage of a fan fiddle yard in model railway?
A fan fiddle-yard is a permanent fiddle yard where each track is accessed via a series of turnouts 'fanning' out from the layout's main operating line. But with so many turnouts connected in series, the space required for a yard of this type is immense. So what is their advantage over other types?
As it happens, the advantages are few. Other types of fiddle yard, such as a sector plate or one that uses a traverser, can offer the same storage capacity using less space. One advantage, however, is that fan fiddle yards can be operated remotely using powered turnouts so they can be situated at the back of a layout or any other hard to reach location, provided you don't need to change locomotives.
Another advantage of a fan fiddle yard is its relative ease of construction compared to other types. The trackwork of a fan fiddle yard is no more complex than anywhere else on the layout whereas, traversers and sector plate types will require some baseboard modification or bespoke construction.
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
Related products
Related posts
-
How to clean model railways track?There is of course the old tried and tested method, the track rubber which does the job, no railway modeller should... - What scale is Hornby?Hornby model railways are OO Scale or 1/76th that is 4 millimetres to the foot (12 inches). It runs on a track with...
- Is Peco track and Hornby track compatible?Peco Setrack and Peco Streamline are compatible with Hornby track as they all share the same gauge width of 16.5mm....
- How to weight my model so it does not tip?For wargaming figures, a small coin or washer glued to the under side of the base will usually to do the job. This...
- How often should I clean my track?This a hard question to answer. There are no hard and fast rules about how often you should clean the track. Bear in...