It is possible to create overhead electrification for a model railway layout. This typically involves installing overhead wires and pantographs on the trains to transfer power from the wires to the trains. Overhead electrification can add a...

Acrylic paint is widely used by hobbyists as it offers many advantages. It is water soluble which removes the need for hazardous and flammable thinners and cleaners, also it is produced by a wide range of manufacturers and so is relatively...

The best paint to use on a metal locomotive kit depends on your personal preference and the desired finish. Here are a few options to consider: Acrylic paints: These are water-based paints that are easy to clean up and dry quickly. They come in a...

Ballast is not typically scale or gauge specific, rather it is designed to be used with a specific type of model railway. The scale refers to the ratio of the size of the model railway to the real-life prototype, while the gauge refers to the...

Older locomotives and rolling stock may not be compatible with Code 55 N Gauge track. This is because Code 55 track has a finer rail profile than older types of track, thus it may not be able to accommodate the wheels of older models. This can...

There are a large number of painting products on the market, each one claiming to be ideal in a particular situation. As such, this can sometimes create confusion as to which product is most suitable in a particular situation. One area of...

The scale of a model is a ratio that compares the size of the model to the size of the real-life object it represents. For example, a model car that is 1/24th the size of the actual car would be considered a 1:24 scale model. To determine the...

In simple terms, no, a gloss surface is not always needed for the application of decals but this is not a straightforward question to answer. As a general rule modellers have applied decals on gloss surfaces for two reasons. Firstly, a gloss...

The most appropriate size of thread to use for rigging a 1/48 scale biplane model would depend on the specific kit and the manufacturer's recommendations. Most modellers will opt for 1/48 scale because it is a pragmatic choice for smaller to...

Some of the potential pros of using foam ballast inlay for a model railway layout include:Easy to install: Generally, foam ballast inlay is relatively easy to install, and can be cut to size and shape as desired. It is also available for...

Code 55 and Code 80 are different types of model railway tracks, both are available for use on an N Gauge layout but they both have different characteristics. Code 55 track has a finer rail profile and smaller spikes or tie plates than Code 80...

There is no one-size-fits-all answer to this question, as the choice between surface-mounted and under-baseboard point motors depends on your specific needs and preferences. Here are a few factors to consider when deciding which type of point...