There are tens of thousands of decals available covering a multitude of different models from trains, planes and...
No products
TPWS Grids - pack of 12 Easily assembled kit of a Train Protection and Warning System grid. Required by Railway Regulations on main lines since 2004. Recommended to be used with:PECO 00/H0 Code 100 and Code 75 Streamline track systems
Curved (No.4 Rad.) Level Crossing, complete with 2 ramps & 4 gates Peco Setrack level crossings are compatible with other crossings in the range allowing you to construct a multiple track level crossing.
TurntableOverall diameter: 327mm Hole required: 309mm Deck length:305mm Depth below baseboard:31mm.
A plastic kit to build an oval glass roof canopy for a mainline station. Kit contains two roof sections and requires assembly.
Starter Track Set, complete, boxed
Standard Straight, 87mm (37/16 in) long
Platform Shelter + Hut Timber Measurements:Shelter footprint: 99 x 30 mmHut footprint: 53 x 30 mm
A plastic kit of a stone-built country station. Requires assembly.
A plastic kit of a brick-built country station. Requires assembly.
Buffer Stop, sleeper built type
No.4 Radius Standard Curve, 571.5mm (22½in) radius
Curved (No.3 Rad.) Level Crossing, complete with 2 ramps & 4 gatesPeco Setrack level crossings are compatible with other crossings in the range allowing you to construct a multiple track level crossing.
Curved (No.2 Rad.) Level Crossing, complete with 2 ramps & 4 gatesPeco Setrack level crossings are compatible with other crossings in the range allowing you to construct a multiple track level crossing.
Curved (No.1 Rad.) Level Crossing, complete with 2 ramps & 4 gatesPeco Setrack level crossings are compatible with other crossings in the range allowing you to construct a multiple track level crossing.
Medium Crossing (22½ angle) Insulfrog
Medium Radius Y Turnout, Insulfrog
Curved Double Radius, Left Hand Turnout, Insulfrog
Curved Double Radius, Right Hand Turnout, Insulfrog
No.2 Radius, Left Hand Turnout, Insulfrog
No.2 Radius, Right Hand Turnout, Insulfrog
Special Curve (for use with Y turnout ST-247) 859.6mm (3327/32 in) radius
No.3 Radius Standard Curve, 505mm (19â…žin) radius
No.1 Radius Standard Curve, 228mm (9in) radius It would take 16 curves to create a full circle of track
No.3 Radius Double Curve, 505mm (19â…žin) radius
Short Straight, 58mm (25/16in) long
Rail joiners metal 24 in a pack
No.1 Radius Half Curve, 228mm (9in) radius It would take 32 curves to create a full circle of track
Straight Level Crossing, complete with 2 ramps & 4 gates
Large r/h turnout Insulfrog
No.2 Radius Double Curve, 438mm (17¼in) radius
Medium l/h turnout Insulfrog
Medium r/h turnout Insulfrog
Rail joiners insulated 12 in a pack
N Flexible Track with Wooden Sleeper (nickel silver rail)
2X STRAIGHT PLATFORM SECTIONS - STONE TYPE Pack contains two 144mm long platform units that simply clip to the ST-91 Stone Type Complete Platform system to make a longer platform.
Straight Platform Unit, brick type
Complete Platform System, stone type
Complete Platform System, brick type
Straight Track Addon Unit, for level crossing
No.4 Radius Double Curve, 333.4mm (13in) radius It would take 8 curves to create a full circle of track
No.1 Radius, Right Hand Turnout, Insulfrog
No.4 Radius Standard Curve, 333.4mm (13in) radius It would take 16 curves to create a full circle of track
No.3 Radius Double Curve, 298.5mm (11¾in) radius It would take 8 curves to create a full circle of track
No.3 Radius Standard Curve, 298.5mm (11¾in) radius It would take 16 curves to create a full circle of track