Point Motor (Extended Pin) View larger

Point Motor (Extended Pin)

PL-10E
Peco

Turnout Motor (Extended Pin)

Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8in) through the baseboard beneath the centre of the tie bar.

More details

In stock

£ 7.90

More info

Turnout Motor (Extended Pin)

The PL series of Turnout Motors is tried and tested, over the last 40 years we have sold literally millions of these motors. Simple, reliable and good value. An extended drive pin is fitted, use the PL-9 Mounting Plate to attach this unit to the underside of the baseboard. Attaching PL-13 and 15 Switches will enable switching for automatic polarity etc.

Recommended to be used with:

  • PL-26 Passing Contact Switches
  • PL-34 Turnout Motor Wiring Harnesses
  • PL-27 Switch Console Units

Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8in) through the baseboard beneath the centre of the tie bar.

Unless you are running clockwork or live-steam trains on your layout, electricity plays a major part in keeping the trains running. You may also have accessories like signals or lights that run on electricity, including operation of your points. This point motor from Peco mounts under the baseboard and has an extended operating pin that that passes through an elongated hole in the baseboard and fits into the hole in the tie-bar of the point. It requires a pulse of electricity to operate and this can easily be provided via a Peco PL-26 passing contact switch. There is also PL-10WE which identical to the PL10E but requires less current.