Valid to UK only - excludes oversized items
There are tens of thousands of decals available covering a multitude of different models from trains, planes and...
Mainline Railways was a British model railway brand that operated between 1976 and 1983, introduced by Palitoy, the...
A Wickham Trolley is a small railway maintenance vehicle once widely used across Britain's railways. Built by D...
The Blue Riband subbrand was a significant step in the evolution of Bachmann Branchline, the UK division of Bachmann...
Applying a camber to a tight curve of track on your model railway layout can help improve the realism and operation...
Click here to receive the tips weekly in your mailbox. You can unsubscribe at any time.
There are a few options for motorising a level crossing on a model railway layout: Servo motor: One option is to use a servo motor to operate the level crossing gates. Servo motors can be controlled with a servo decoder, allowing smooth operation...
Yes, it is generally recommended to use ballast with a trackbed on a model railway layout. Here are a few reasons why: Realism: Ballast helps to create a more realistic appearance for a track, making it look more like a real railway. Without...
A Capacitor Discharge Unit (CDU) is a device that can be used in conjunction with a point motor in model railways to provide more reliable and consistent performance. Here are some circumstances where a modeller may wish to consider using a CDU...
There are several options for motorising a turntable on a model railway layout, including:Manual operation: The most basic option is to operate the turntable manually, using a handle or crank to rotate the turntable. This is a simple and...
When painting a surface, it's important to use a primer before applying the topcoat. The primer acts as a base coat that helps the topcoat better adhere and provides a smooth surface for the paint to be applied to. In some cases, it may be...
There are several ways to display and store scale models, depending on the type of model and the preferences of the collector. One of the best ways to prepare a model for display is to ensure that it has been given a good varnish. This will lock...
Yes, continuous high speeds can damage the motor of a model locomotive. Running a model locomotive at high speeds for extended periods of time can put a lot of stress on the motor and gears, which can cause them to overheat, wear out more quickly...
Bare metal can be a very difficult colour to paint well as it has a habit of showing up any imperfections very clearly. Additionally, bare metal comes in a surprising array of colour tones that are all subtly different. Historically many modellers...
Yes, it is recommended to use a surge protector for the electrics used for model railways. Model railway systems often use low-voltage direct current (DC) power supplies, which can be susceptible to electrical surges and spikes. These surges can...
White metal figures are typically painted using oil-based or enamel paints. These types of paints have a higher viscosity and are slower-drying than other types of paint, which allows for more time to work on the details of the figure and achieve...
Nickel-silver rails are commonly used in model railways due to their many advantages over steel rails. Here are a few of the main advantages of using nickel-silver rails:Increased conductivity: Nickel-silver is a more conductive metal than...
The ideal type of finish chosen by a modeller for painting a model railway locomotive will largely depend on personal preference and the level of realism the modeller is aiming to achieve. However, here's a general overview of the different types...