Bubble cars were a single-unit first generation DMU built by British Rail in the late 1950s and 1960. Because they...
No products
OO-9 Box Van, Bass Brewery Livery, No.19 Ready-to-run Wagon. Includes separately fitted brake hanger, brake lever and vacuum pipes.
OO-9 Box Van, Colmans Mustard Ready-to-run Wagon. Includes separately fitted brake hanger, brake lever and vacuum pipes.
HOm Curved Turnout, Large Radius, Right HandLength: 237mm Radius: 609457mm
OO/HO, Highland Railway Signal Box Including the stairs the finished model's footprint is 90 x 40mm.
Setrack 'O' No.2 Radius Unifrog Turnout Left Hand Technical Specification:Length: 394mm Frog Angle: 22.5 Degrees Radius: 1028mm
Window & Frames (8 per Pack) Useful detail components for scratchbuilders. The kit contains parts to construct 8 windows and frames, four of the windows are portrayed closed and four are half open. Window measurements: 34mm wide x 48mm high Plastic Model Kit: need to be assembled, glued and painted.
Station Seat (Midland Railway Style) Kit for 4 seats of Midland Railway origin, typical Victorian cast iron design. Recommended to be used with PECO 0 Code 124 Setrack and Streamline Code 124 and code 143 Flexible track systemsPlastic Model Kit: need to be assembled, glued and painted.
Doors & Frames (2 per Pack) Useful detail components for scratchbuilders. Door measurements (including frame): 67mm high x 45 wide Plastic Model Kit: need to be assembled, glued and painted.
O Gauge, Signal Box InteriorPlastic Model Kit: need to be assembled, glued and painted.
O gauge Ground Level Signal Box, Wood Plastic Model Kit: need to be assembled, glued and painted.
10ft WB Wagon Chassis, Steel Type Sole Bars with Disc Wheels
Simplex Auto Coupler The original metal coupling designed for use with the SL30 uncoupler, allows a vehicle to be lifted straight from within a train without derailing adjacent vehicles.
LMS Meat Van Plstic kitPre-coloured moulded parts
N Gauge Wagon Crates LEP Furniture Removals (pack of 2)
N Gauge Wagon Crates, SR Furniture Removals (Pack of 2)
N Gauge Wagon Crates, LNER Furniture Removals (Pack of 2)
Box Van Roof Pack of 2 Black plastic moulding, detail includes rainstrips, strapping etc. to finish off a Peco Wonderful Wagon Box Van or a scratchbuilding project.
Lime Wagon Roof Grey plastic moulding, detail includes strapping etc. to finish off a Peco Wonderful Wagon Lime Wagon or a scratchbuilding project.
Plastic bearings (short type) for pin-pointed wheelsets. Pack contains approximately 25 bearings. Diameter = 2.5 mm.
Coke Extension Board Kit Black plastic moulded components for modifying an open wagon.
Insulaxles type A Specially treated metal axles which provide insulation when used with all metal wheels.
Magni-Simplex Auto Coupler • Allows a vehicle to be lifted straight from within a train without derailing adjacent vehicles• Delayed action feature - after uncoupling, a vehicle can be pushed to any position• Supplied complete with spring, screw and adaptor moulding
Turnout, Large Radius, Left HandLength: 164mm Frog Angle: 10 Degrees Radius: 914mm Visible rail height: 1.4mmAll brands of N Gauge model locomotives will run on this track.
Salt Wagon Roof Plastic moulding, detail includes rainstrips, strapping etc. to finish off a Peco Wonderful Wagon Salt Wagon or a scratchbuilding project.
N Gauge Code 55 Electrofrog Turnout, Large Radius, Rifght HandLength: 164mm Frog Angle: 10 Degrees Radius: 914mm
N Gauge Code 55 Electrofrog Turnout, Small Radius, Left HandLength: 123mm Frog Angle: 10 Degrees Radius: 305mm
N Gauge Code 55 Unifrog Streamline Medium Radius Right HandLength: 137mm Frog Angle: 10 Degrees Radius: 457mm
O Gauge, Concrete Sleepers (single) 60 concrete effect sleepers for track construction using Code 143 Flat Bottom rail.
Sleepering for Turnouts (Single) 20x 175mm lengths of wood grain effect sleepering for track and turnout construction.
Chairs, Slide Rail, for Code 124 Rail (Single) 50 injection moulded chairs for the construction of turnouts, using Code 124 Bullhead rail.
Chairs, Running Rail, For Code 124 Rail, (Single) 100 injection moulded chairs for the construction of turnouts and plain track, using Code 124 Bullhead rail.
Your Guide To Modelling Heritage RailwaysModelling the preservation era in the popular scales Inspirational layouts Step-by-step modelling features Track plans you can build Standard and narrow gauge examples History of railway preservation
Streamline, OO Bullhead, Rail Buffer Stop (2)
Brick Base Signal Box Plastic Model Kit: need to be assembled, glued and painted.
For use with all solenoid motors (e.g. PL-10 and PL-11). Connect this unit to either a 16v AC or 12v DC supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time.
Y medium radius electrofrogLength: 127mm Frog Angle: 8 Degrees Radius: 762mm
Your Guide to Modelling Swiss Railways
O Gauge, Police Phone BoxPlastic Model Kit: need to be assembled, glued and painted.
GWR Square Post Signal (Home or Distant)Plastic Model Kit: need to be assembled, glued and painted.
Platform Accessories Modern Era
Bus Kit, OO, Red Vari-Kit, Leyland National Single Deck
Leyland National Single Decker Bus, Vari-kit, OO gauge. This variable kit allows you to construct a Leyland National Mk1 bus in OO gauge, the parts come in a production grey colour so painting is required (paints not included).
Leyland Olympian Double Decker Bus, Blackpool CorporationOO gauge 1/76 scale.
Setrack 'O' No.2 Radius Unifrog Turnout Right Hand Technical Specification:Length: 394mm Frog Angle: 22.5 Degrees Radius: 1028mm
Peco Setrack, NG, No.2 Rad Std Curve 263.5mm (8PK ST-14)
Peco Setrack, NG, No.3 Rad Std Curve 298.5mm (8PK ST-16)