To make your model railway tunnels look more detailed and realistic, focus on texture, weathering and scenic...
No products
Subcategories
2 aspect platform starter kit round head
Curved Double Radius Turnout. Right Hand Electrofrog. Nominal radii:Outside 1524mm, Inside 762mm. Length:256mm.
Code 75 Electrofrog Large Left Hand PointLarge Radius Turnout. Left Hand Electrofrog. Nominal radius: 1524mm Angle: 12 degrees Length 258mm.
A digital colour light signal specifically designed for use with DCC. The signal features dual heads with two-aspect red/green lights and comes assembled with clips to attach directly to the track. The 'One Touch' function and built-in decoder ensures set up is both wire-free and simple.
HO/OO Scale Buffer Stop w/Flashing Light (wired) New Buffer stop for DC layouts.Simply wire to a power supply. (12-16v AC/DC.With flashing red LEd light.
HO/OO Scale Buffer Stop w/Flashing Light (DCC Wireless) New Buffer stop for DCC layouts.With flashing red LEd light.
Pack of 12 fishplates for connecting lengths of flexible or semi-flexible track, or replacing missing fishplates from standard track pieces.
Tests N/OO/HO tracks for power and faults. Ready to use. SWITCH OFF POWER BEFORE CONNECTING THIS ACCESSORY.Quickly tests track for power faults Low cost and easy to use Works on N, OO or HO track Indicates DCC, DC polarity or fault Small enough to check point frogsIncludes instructions.
Code 100 Electrofrog Small Left Hand Point
Code 100 Electrofrog Small Right Hand Point
POWERBASE OO Starter Kit (2.5m & 6 Magnets) For OO/HO and larger scales. Contains 25x/2.5 Metres of PowerBase Centipede Plates, 6 magnets and 6+ housings, plus pan head screws to assist magnet mounting. (enough for 2-3 4mm scale lomotives).
Nickel Silver FlexitrackCode 100, Concrete Sleepered
Dapols Single post semaphore signals are easy to fit and operate and offer an affordable route to accurately model working OO Gauge signals. All signals work on 16V AC and feature.
3 colour signal
Ground Shunt Signal Kit with 2 white & 1 red LEDs Includes : - long life pre wired LEDs, - a resistor, - signal head and base plate, - full instructions Suitable for 12V DC power supply.
No.3 Radius Standard Curve, 505mm (19⅞in) radius - pack of 8
No.3 Radius Double Curve, 505mm (19⅞in) radius - pack of 4
Plastic Buffer Stop. Clips to straight or curved track.
Code 100 Electrofrog Large Right Hand Point
Dapol innovative Easi-Fit Catenary masts are an ideal additon to any OO Gauge layout with an electric theme.
Double Track Level Crossing Length 168mm. Comes with track moulded into the base at intervals to suit standard Hornby twin-track geometry. Supplied with traditional gates as shown and alternative modern barriers.
Extension pack C Extend your set in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on your TrakMat scenic underlay sheet Add Extension Pack C to the Starter Oval plus Extension Packs A and B to make this layout.
Special Curve (for use with Y turnout ST-247) - pack of 2
Short Straight, 79mm (3⅛in) long - pack of 4
A digital two-aspect colour light signal specifically designed to work with DCC layouts. This signal represents a stop/caution signal with red and yellow LED lights fitted. The signal comes fully assembled with a decoder installed so there's no need for any wiring or additional components. Simply plug and go!
POWERBASE OO Value Pack (5m & 12 Magnets) For OO/HO and larger scales. This economical Value Pack contains 50x/ 5 Metres of PowerBase Centipede Plates, 12 magnets and 12+ housings, plus 30+ blackened pan head screws to assist magnet mounting. (enough for 2-3 4mm scale lomotives).
Double Straight, 168mm (6⅝in) long - pack of 8
No.4 Radius Standard Curve, 571.5mm (22½in) radius - pack of 8
One Touch DCC Signal Home (Red / Green) Fully assembled signal with head, aluminium mast and electronics fitted inside base.
One Touch DCC Quad Point Controller (4)
No.2 Radius Double Curve, 438mm (17¼in) radius - pack of 4
No.1 Radius Standard Curve, 371mm (14⅝in) radius - pack of 8
Isolating Standard Straight & Switch, 168mm (6⅝in) long - pack of 2
Code 100 Flat Bottom Rail Nickel Silver 914mm x 6
Special Short Straights - pack of 4
No.2 Radius Standard Curve, 438mm (17¼in) radius - pack of 8
Track Laying Tool 10" OO 254mm Straight Use with flexible track. Also suitable for HO scale tracks.
Buffer Stops with Light for DCC, wireless
Dapols Single post semaphore signals are easy to fit and operate and offer an affordable route to accurately model working OO Gauge signals. All signals work on 16V AC and feature.
No.1 Radius Double Curve, 371mm (14⅝in) radius - pack of 4
Standard Straight, 168mm (6⅝in) long - pack of 8
Totally flat areas of land are very rare in nature. They usually occur as part of human intervention when a large flat area is required. A prime example is the railway, which has large expanses of flat land in stations, good yards, dockyards, and so on. Therefore, one way to add realism to your model railway layout is to make it look like it was carved...
Code 100 Curved double Right Hand electrofrog
Dapols Single post semaphore signals are easy to fit and operate and offer an affordable route to accurately model working OO Gauge signals. All signals work on 16V AC and feature;