Modern Graham Farish and Dapol rolling stock should in theory couple together with little problem. This is thanks to...
No products
Subcategories
No.2 Radius Standard Curve, 438mm (17¼in) radius
Track Fixing Pins These 10mm pins are designed to fix track to baseboard through holes ready drilled in each track section. Approximately 130 pins in a pack. Do not hammer pins down hard as you may distort the track.
No.2 Radius Half Curve, 438mm (17¼in) radius
No.1 Radius Standard Curve, 371mm (14⅝in) radius
No.3 Radius Double Curve, 505mm (19⅞in) radius
Curved Double Radius, Left Hand Turnout, Insulfrog
Special Curve (for use with Y turnout ST-247) 859.6mm (3327/32 in) radius
No.2 Radius, Right Hand Turnout, Insulfrog
No.2 Radius, Left Hand Turnout, Insulfrog
Curved Double Radius, Right Hand Turnout, Insulfrog
No.4 Radius Standard Curve, 571.5mm (22½in) radius
A plastic kit of a Pratt Truss Gantry. This kit requires assembly and painting and does not include any signals, therefore, allowing you to cater for a region or configuration of your choosing.
A versatile plastic kit that will build up to four LNER signals of different types. The signals in this kit all feature LNER lattice posts and upper quadrant signal arms (also suitable for LBSCR). Assembly and painting required.
Code 75 - Code 100 - Transition track
OO Buffer Stop & Light
Rail joiners code 75 24 in a pack
Insulated rail joiners code 75 12 in a pack
Code 75 R/H point Electrofrog
Code 75 L/H point Electrofrog
(24in) x 6 For Z Scale and also used as OO Scale Conductor Rail.
Flexible Track, Wooden Sleeper Finescale code 75 1 yard
Dummy point motors - pack of 6 One piece moulding adds realism to turnouts. (6 per packs) Recommended to be used with:PECO 00/H0 Code 100 and Code 75 Streamline track systems
A versatile plastic kit that will build up to four signals of different types. The signals in this kit all feature LMS round posts and upper quadrant signal arms. The kit also includes an additional four ground signals. Assembly and painting required.
A versatile plastic kit that will build up to four LNWR signals of different types. The signals in this kit all feature LNWR square posts and lower quadrant signal arms. The kit also includes an additional four ground signals. Assembly and painting required.
OO gauge Motorised Turntable Length : 26.5 cmColour : Grey
A plastic kit of an LMS distant signal with round post and upper quadrant arm.
A plastic kit of an LMS home signal with round post and upper quadrant arm.
A plastic kit of a GWR junction/bracket signal. Kit includes 1x signal post and bracket with a choice of home and distant signal arms to create a configuration of your choice.
A plastic kit of a GWR round post junction signal with lower quadrant arms. The kit comes with home, distant, and shunt options. Requires assembly and painting.
A plastic kit of two GWR round post signals with lower quadrant arms and home/distant build options. Requires assembly and painting.
A versatile plastic kit that will build up to four signals of different types. The signals in this kit all feature GWR square posts and lower quadrant signal arms. The kit also includes an additional four ground signals. Assembly and painting required.
Set of 4 Ground Signals. Plastic kit requiring assembly and painting.
Decouplers Rovex/Hornby type
Create the illusion of a pedestrian tunnel or subway under the platforms of your station with this subway staircase kit. Contains two sets of steps. Requires assembly.
3 Way medium radius Electrofrog
Medium radius L/H Electrofrog
Medium radius R/H Electrofrog
2 Colour Light Signal & Switch Box (Dummy) 3 aspect lights with route indicator - some assembly required - requires painting - 70mm tall
Totally flat areas of land are very rare in nature. They usually occur as part of human intervention when a large flat area is required. A prime example is the railway, which has large expanses of flat land in stations, good yards, dockyards, and so on. Therefore, one way to add realism to your model railway layout is to make it look like it was carved...