Re-railer The special Hornby coupling unit allows rolling stock to be connected together, or separated, without having to be touched by hand. If fitted at the beginning of each siding, realistic shunting and sorting operations can be carried out.
Power Track A section of R600 track with power unit for use with Live Steam and standard 12V DC systems. Length 168mm
EXTENSION PACK A
Remote Uncoupler Unit
Extension pack B
Extension pack C Extend your set in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on your TrakMat scenic underlay sheet Add Extension Pack C to the Starter Oval plus Extension Packs A and B to make this layout.
Track Fixing Pins These 10mm pins are designed to fix track to baseboard through holes ready drilled in each track section. Approximately 130 pins in a pack. Do not hammer pins down hard as you may distort the track.
3 POINTS UNDERLAY
Double Track Level Crossing Length 168mm. Comes with track moulded into the base at intervals to suit standard Hornby twin-track geometry. Supplied with traditional gates as shown and alternative modern barriers.
Left-Hand Curved Point Radius 438mm arcs 22.5° and 33.75°
Right-Hand Curved Point Radius 438mm arcs 22.5° and 33.75°