Opaque Brick Joint Filler liquid View larger

Opaque Brick Joint Filler liquid

49304
ModelMates

Effects Liquids. Covers dark surfaces – 18ml Plastic Pot

Fills brick and stone joints on buildings. Just brush on, let dry and wipe off using a damp cloth.

More details

This product is no longer in stock

£ 7.95

More info

Effects Liquids. Covers dark surfaces – 18ml Plastic Pot

Fills brick and stone joints on buildings. Just brush on, let dry and wipe off using a damp cloth.

  • Opaque brick joint filler liquid creates realistic brick and stones joint.
  • Water soluble: brush straight from pot over the full surface of the wall, filling the brick or stone joints. Let fully dry and then wipe off the dry residue using a damp cotton bud leaving brick joint filler trapped in the joints.
  • Best leave to dry for an hour or more.
  • Wipe off at a 45 degree angle to the joints, otherwise you will wipe brick joint filler out of the joints.
  • Brick joint filler is white. Colour using any of the translucent weathering liquids/washes. Mud brown is a good colour to use to achieve a sand and cement mortar shade. Sand brown is a good colour to use for a limestone shade. Slate grey is good for a general grey coloured mortar. Just mix brick joint liquid and one of the above colours in a separate dish and use quickly.
  • Thin brick joint filler using Modelmates Translucent thinning liquid.
  • If left uncovered for too long the liquid will dry. If the liquid has dried out, just mix with some Modelmates Translucent thinning liquid to make wet again.