As any seasoned modeller will tell you, using washes is an essential technique for adding depth, shading and realism...
No products
Port sharing device
Sequencing light hub
Controller Caddy Universal Handset Holder The “Controller Caddy” is a universal controller holder for smart phones and all NCE, Digitrax, Lenz, MRC, Gaugemaster and similar design handsets.
Universal Relay Switch (3 Pack) The GM500 is a self latching relay that works in conjunction with standard 3 wire point motors, it has DPDT contacts and ideal for switching both frog and signals. LENGTH 42mmWIDTH 24mmDEPTH 14mm
Dimensions:Body only: 28mm x 38mm x 52mm deep Top overall inc Fulcrum and tabs: 40mm x 45mm Depth inc soldering-free connectors: 68mmPower:Switchable 6~12v or 12~18v DC. Avg power 20mAConnection:9 way spring terminals. Wire diameter up to 32x.2 or 18g. Ideal .16x.2 or 20g. Minimum 7x.2 or 24gControl: Change turnout by reversing polarity of DC...
0.9 Amp 4 Function 8 Pin DCC Decoder featuring RailComPlus®
Closed Microswitch Closed type, rated 16v 2amps (continuous) or 2.5amps (momentary). Use this microswitch with the PL-19 Microswitch Housing for polarity switching the SL-E790BH 0 Gauge Double Slip. Recommended to be used with PL-19 Microswitch Housing
Wall Mounted Transformer - 1x 16v AC or
Pack of 3 autofrog The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout.DCC Track Voltage: 12-20v Frog Current: 2 Amp max DCC80 Typical Current Consumption: 20mA
DCC Autofrog The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout.DCC Track Voltage: 12-20v Frog Current: 2 Amp max DCC80 Typical Current Consumption: 20mA
Red/Black Twinned Wire 10m (14 x 0.15mm)
Point Motor Wire (Red/Green/Black) 10m Tripled (14 x 0.15)